Why should you clean your tweezers and how often should you clean them?
Most councils/state laws require you to clean tweezers and similar tools after EVERY SINGLE CLIENT!
Bet you didn’t know that!
If you don’t clean your tweezers, you risk spreading infections such as Blepharitis and conjunctivitis, which are both are nasty gross infections that affect the eye area.
Think about it… would you want your lashes done with tweezers that haven’t been cleaned? You have no idea what the past 20 customers before you were infected with!
When you pay a couple hundred $$ to get your lashes done, you want your eyes looking amazing with those fresh new lashes, not all gross and infected right?
So do your customers!
Well read on! We will describe exactly how you should be cleaning them!
If you have tweezers with glue on them you will need to get it off first as it is unlikely to come off in the sterilisation process.
HOW TO CLEAN YOUR TWEEZERS – INDUSTRY STANDARD:
What to do if you have glue hardened onto the tweezers:
There are 2 options you can choose from:
What you need:
- The dirty tweezers
- Cotton pads
If you have acetone, you can soak the end of the tweezer in acetone for about 5minutes (use a glass jar or similar) and it should come off easily with a cotton pad once you’ve soaked it.
If you don’t have acetone you can just simply try and flick it off with your nail or something else similar. You want to use something that is hard enough to flick the glue off but not too hard that it will damage the tweezer. Using another tweezer or a coin etc may damage/scratch the tweezer.
Once you have the glue off you can now clean and sterilise the tweezers!
What you will need:
- Your tweezers/tools that are in need of a clean
- Warm water
- Detergent/Dishwashing liquid
- Dish scrubber
- Isopropyl Alcohol*
- Clean Lint-free cloth
*With the Isopropyl Alcohol we don’t stock it at Locks Lash as we are not able to send it to you through Australia post, but you can easily get it from Bunnings or somewhere similar. Make sure you get 100% Isopropyl Alcohol and not the watered down one (explained why later on).
Most councils we have checked with recommend this method for sterilising your tools. We advise you check with your local council about the specific requirements regarding cleaning tools in your region as it may differ.
**You must clean your tools between every client to reduce risk of infection and to be compliant with health and safety laws. The process for cleaning your tweezers takes some time so if you have back to back clients you will need several sets of tweezers. Buy more here**
STEP BY STEP GUIDE:
1) After removing any glue from the tweezers, get some warm water and mix in some detergent (the same amount/concentration you would use for your dishes). Give them a good scrub all over with your scrubbing brush or pad to remove any particles.
2) Rinse them under warm water to remove the detergent.
3) Let them air dry or dry them with a clean lint-free cloth
4) Once dry, submerge the tweezer in isopropyl alcohol for at least 30minutes. Dry with a clean disposable cloth/tissue.
*a note on the isopropyl alcohol; you should only use 100% isopropyl alcohol and not dilute it with water. Watering it down can make your tweezers rust/tarnish for some reason… which is not what you want to happen to your favourite pair!